智能制造与精密加工研究室

  1. 首页
  2. 文章专利

文章专利

论文（2024）

  1. Xiao X, Wang J, Feng P, et al. Fast Human Motion reconstruction from sparse inertial measurement units considering the human shape[J]. Nature Communications, 2024, 15(1): 2423. [详细]
  2. C. Yu, J. Wang, G. Zhao, P. Feng and J. Zhang, "A Novel Method of Multitarget Augmented Reality Assembly Result Inspection for Large Complex Scenes," in IEEE Transactions on Industrial Informatics, 2024, doi: 10.1109/TII.2024.3357205. [详细]
  3. Chen C, Feng P, Feng F, et al. Fast texturing of micron grating on curved metallic surfaces using bending-torsional-coupled rotary ultrasonic side milling[J]. Manufacturing Letters, 2024. [详细]
  4. Lan T, Feng P, Zhang J, et al. A high-bandwidth frequency tracking method for giant magnetostrictive ultrasonic machining system by valuing dynamic resonance impedance[J]. Mechanical Systems and Signal Processing, 2024, 210: 111193. [详细]
  5. Li Z, Zhang J, Zheng Z, et al. Elliptical vibration chiseling: a novel process for texturing ultra-high-aspect-ratio microstructures on the metallic surface[J]. International Journal of Extreme Manufacturing, 2024. [详细]

论文（2023）

  1. 冯平法,刘嘉辉,王子标等.钛合金TB6连接孔挤压强化残余应力及疲劳寿命试验研究[J].航空制造技术,2023,66(11):14-21. [详细]
  2. P. Ding, J. Zhang, P. Feng, X. Zhang, Z. Zheng, J. Wang, Fabrication of Optical Fourier Surface by Multiple‐Frequency Vibration Cutting for Structural True Coloration. Small 2023, 2303500. [详细]
  3. Liu J, Lin X, Feng F, et al. Study on the surface defect of aluminum alloy hole burnishing[J]. Tribology International, 2023, 184: 108490. [详细]
  4. Zhimeng Chen, Pingfa Feng, Jianfu Zhang, Feng Feng, Huawen Zhang, Jinhui Yu, Jianjian Wang, Shaped vibration cutting: A novel fabrication method for mid-infrared relief gratings with controllable profiles, Journal of Materials Processing Technology, Volume 317, 2023 [详细]
  5. Zhiwei Li, Jianfu Zhang, Zhongpeng Zheng, Pingfa Feng, Dingwen Yu, Jianjian Wang, Vibration chiseling: A backward-moving cutting for the high-efficiency fabrication of short metallic microfibers, Manufacturing Letters, Volume 36, 2023, Pages 80-85 [详细]
  6. Ganlin Zhao, Pingfa Feng, Jianfu Zhang, Chang Yu, Jianjian Wang, Rapid offline detection and 3D annotation of assembly elements in the augmented assembly, Expert Systems with Applications, Volume 222, 2023 [详细]
  7. Jinchuan Yang, Pingfa Feng, Jianfu Zhang, Hailong Yang, Jianjian Wang, On the oxidation resistance of sinusoidal microstructure fabricated by elliptical vibration cutting, Surface and Coatings Technology, Volume 459, 2023 [详细]
  8. Zhongpeng Zheng, Jianfu Zhang, Pingfa Feng, Jianjian Wang, Controllable fabrication of microstructures on the metallic surface using oblique rotary ultrasonic milling, International Journal of Mechanical Sciences, Volume 237, 2023 [详细]
  9. Tian Lan, Pingfa Feng, Jianfu Zhang, Huilin Zhou, Jianjian Wang1, Modeling the load capacity of frequency-tracked rotary ultrasonic machining system[J], International Journal of Mechanical Sciences,2023 [详细]

论文（2022）

  1. Zhimeng Chen, Pingfa Feng, Jianjian Wang, Feng Feng, Huiting Zha, Understanding the abnormal effects of ultrasonic vibration on tool wear and surface generation in Zr-based bulk metallic glass cutting, CIRP Journal of Manufacturing Science and Technology, Volume 39, 2022 [详细]
  2. Jianjian Wang, Yaoke Wang, Jianfu Zhang, Volker Schulze, and Ping Guo, "Blazed grating enables highly decoupled optically variable devices fabricated by vibration-assisted diamond texturing," Opt. Express 30, 8829-8846 (2022) [详细]
  3. Yang, J., Feng, P., Zhang, J. et al. Design optimization of ultrasonic vibration cutting tool to generate well-decoupled elliptical trajectory. Int J Adv Manuf Technol 119, 7199–7214 (2022 [详细]
  4. Ke Ma, JianJian Wang, Jianfu Zhang, Pingfa Feng, Dingwen Yu, Shahzad Ahmad, A force-insensitive impedance compensation method for giant magnetostriction ultrasonic cutting system of Nomex honeycomb composites, Composite Structures, Volume 294, 2022 [详细]
  5. Zhongpeng Zheng, Jianfu Zhang, Pingfa Feng, Zhiwei Li, Jianjian Wang, Fabrication of hierarchical micro/nanostructures on titanium alloy by combining rotary ultrasonic milling and anodizing, Manufacturing Letters, Volume 34, 2022 [详细]
  6. Zhiwei Li, Jianjian Wang, Meng Yuan, Zhongyu Wang, Pingfa Feng, Feng Feng, An indicator to quantify the complexity of signals and surfaces based on scaling behaviors transcending fractal, Chaos, Solitons & Fractals, Volume 163, 2022 [详细]
  7. Zhimeng Chen, Pingfa Feng, Jianjian Wang, Feng Feng, Huiting Zha, Understanding the abnormal effects of ultrasonic vibration on tool wear and surface generation in Zr-based bulk metallic glass cutting, CIRP Journal of Manufacturing Science and Technology, Volume 39, 2022 [详细]
  8. Yang, J., Feng, P., Zhang, J. et al. Full wedge-type insert mounting method to improve the vibration reproducibility of ultrasonic cutting system. Int J Adv Manuf Technol 123, 1755–1775 (2022) [详细]
  9. Ma, K,. Wang, JJ,.Zhang, JF,. et al. A highly temperature-stable and complete-resonance rotary giant magnetostrictive ultrasonic system [J]. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2022, 214: 106927. DOI10.1016/j.ijmecsci.2021.106927 [详细]
  10. 兰天, 冯平法, 张建富, 等.超磁致伸缩换能器涡流损耗及温升抑制研究[J].机械工程学报, 2022 [详细]
  11. Lan T, Wang J, Feng P, et al. Modeling the optimal compensation capacitance of a giant magnetostrictive ultrasonic transducer with a loosely-coupled contactless power transfer system [J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2022. 23(10):1-14. [详细]

论文（2021）

  1. 杨金川，冯平法，马恪，张建富. 车刀螺纹紧固连接对纵弯复合超声椭圆振动特性的影响[J]. 振动与冲击, 2021, 40(23): 100-108 [详细]
  2. B. Zhou, J. Zhang, Y. Fu, D. Yu and J. Wang, "Feature Extraction and Analysis Method of Spindle Vibration Signal for Tool Wear Monitoring," 2021 5th International Conference on Automation, Control and Robots (ICACR), 2021, pp. 184-189, doi: 10.1109/ICACR53472.2021.9605184. [详细]
  3. Ganlin Zhao，Pingfa Feng，Jianfu Zhang，Dingwen Yu， Zhijun Wu. Information integration and instruction authoring of augmented assembly systems [J]. International Journal of Intelligent system. 2021;36:5028-5050. [详细]
  4. Huang B, Feng P, Zhang J, et al. A Novel Positioning Module and Fusion Algorithm for Unmanned Aerial Vehicle Monitoring [J]. IEEE Sensors Journal, 2021, 21(20): 23006-23023. [详细]
  5. Hailong Yang, Jianjian Wang, Jianfu Zhang, Pingfa Feng, Zhijun Wu, Dingwen Yu. On the material removal mechanism in rotary ultrasonic milling of ultralow-density silica aerogel composites [J]. Journal of Manufacturing Processes, 2021, 70: 621-635. [详细]
  6. Wentao Luo, Jianfu Zhang, Pingfa Feng, Dingwen Yu, Zhijun Wu. A temporal-spatial attention-based action recognition method for intelligent fault diagnosis[J]. ISA TRANSACTIONS. 2021. [详细]
  7. Pang Y, Feng P, Wang J, et al. Performance analysis of the longitudinal-torsional ultrasonic milling of Ti-6Al-4V[J]. The International Journal of Advanced Manufacturing Technology. 2021: 1-12 [详细]

论文（2020）

  1. Wang J, Liao W, Guo P. Modulated ultrasonic elliptical vibration cutting for ductile-regime texturing of brittle materials with 2-D combined resonant and non-resonant vibrations[J]. International Journal of Mechanical Sciences. 2020, 170: 105347. [详细]
  2. Shahzad Ahmad, Jianfu Zhang, Zhang, J., Feng, P., Yu, D., & Wu, Z. (2020). Experimental study on rotary ultrasonic machining (RUM) characteristics of Nomex honeycomb composites (NHCs) by circular knife cutting tools. Journal of Manufacturing Processes, 58, 524-535.DOI: https://doi.org/10.1016/j.jmapro.2020.08.023 [详细]
  3. Ruoyu Cui, Jianfu Zhang, Pingfa Feng, et al. A path planning method for v-shaped robotic cutting of Nomex honeycomb by straight blade tool [J]. IEEE Access, 2020, 8: 162763-162774 [详细]
  4. Shahzad Ahmad, Jianfu Zhang, Feng, P., Yu, D., Wu, Z., & Ma, K. (2020). Processing Technologies for Nomex Honeycomb Composites (NHCs): a critical review. Composite Structures, 112545. [详细]
  5. Huilin Zhou, Jianfu Zhang, Pingfa Feng, et al. Investigations on a mathematical model for optimum impedance compensation of a giant magnetostrictive ultrasonic transducer and its resonance characteristics [J]. Ultrasonics, 2020, 110: 106286. [详细]
  6. Huilin Zhou, Jianfu Zhang, Pingfa Feng, et al. On the optimum resonance of giant magnetostrictive ultrasonic transducer with capacitance-based impedance compensation [J]. Smart Materials and Structures, 2020, 29(10):105002. [详细]
  7. Ma Ke , Zhang Jianfu , Feng Pingfa , et al. Modeling and fitting of an ultrasonic straight-blade cutting system[J]. International Journal of Advanced Manufacturing Technology, 2020:1-11. [详细]
  8. LUO W, FENG P, ZHANG J, et al. An Adaptive Adjustment Strategy for Bolt Posture Errors Based on an Improved Reinforcement Learning Algorithm. [J]. Applied Intelligence, 2020, 08 [详细]
  9. W. Luo, J. Zhang, P. Feng, D. Yu, and Z. Wu, " A Deep Transfer-learning Based Dynamic Reinforcement Learning for Intelligent Tightening System," International Journal of Intelligent Systems, 2020/12/2.doi: 10.1002/int.22345 [详细]
  10. W. Luo, J. Zhang, P. Feng, D. Yu, and Z. Wu, "A concise peephole model based transfer learning method for small sample temporal feature-based data-driven quality analysis," Knowledge-Based Systems, 2020/02/22/ 2020. [详细]
  11. Wang J, Wang Y, Yang Y, et al. Fabrication of structurally colored basso-relievo with modulated elliptical vibration texturing[J]. Precision Engineering. 2020, 64: 113-121. [详细]

论文（2019及以前）

  1. WENTAO L, YAN R, JIANFU Z, et al. Research on Simulation Decision of Logistics in Flexible Factory; proceedings of the 2019 3rd International Conference on Data Mining, Communications and Information Technology, DMCIT 2019, May 24, 2019 - May 26, 2019, Beijing, China, F, 2019 [C]. Institute of Physics Publishing [详细]
  2. Huilin Zhou, Jianfu Zhang, Pingfa Feng, et al. Performance Evaluation of a Giant Magnetostrictive Rotary Ultrasonic Machine Tool [J]. Journal of Advanced Manufacturing Technology, 2019. [详细]
  3. Huilin Zhou, Jianfu Zhang, Dingwen Yu, et al. Advances in rotary ultrasonic machining system for hard and brittle materials [J]. Advances in Mechanical Engineering, 2019. [详细]
  4. Huilin Zhou, Jianfu Zhang, Pingfa Feng, et al. An output amplitude model of a giant magnetostrictive rotary ultrasonic machining system considering load effect [J]. Precision Engineering, 2019. [详细]
  5. Huilin Zhou, Jianfu Zhang, Pingfa Feng, et al. Design on an amplitude prediction model for a giant magnetostrictive ultrasonic transducer [J]. Ultrasonics, 2019. [详细]
  6. LUO W, FENG P, ZHANG J, et al. Research on a Radiation Model for Bolt-Tightening Force Attenuation of Wheel-Type Parts [J]. IEEE Access, 2019, 1 [详细]
  7. Wang J, Du H, Gao S, et al. An ultrafast 2-D non-resonant cutting tool for texturing micro-structured surfaces[J]. Journal of Manufacturing Processes. 2019, 48: 86-97. [详细]
  8. 赵甘霖,冯平法,张建富.钛合金超声振动钻削工艺特性仿真及试验研究[J].北京航空航天大学学报,2019,45(08):1597-1605 [详细]
  9. T. Du, P. Gao, J. Zhang and P. Feng, "Static loading behavior of joint interface in split TBM cutterhead," 2019 IEEE 2nd International Conference on Automation, Electronics and Electrical Engineering (AUTEEE) [详细]
  10. 张巧丽,张建富,冯平法,郁鼎文,吴志军.斜槽式超声变幅杆纵扭特性研究[J].振动与冲击,2019,38(10):58-64+78.DOI:10.13465/j.cnki.jvs.2019.10.009. [详细]
  11. Y. Zha, J. Zhang, D. Yu, P. Feng and Z. Lin, "Modeling method for bolted joint interfaces based on transversely isotropic virtual materials," 2018 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) [详细]
  12. 查慧婷,冯平法,张建富,郁鼎文,吴志军.超声振动辅助划擦高体分铝基碳化硅的刀具磨损特性[J].吉林大学学报(工学版),2019,49(02):458-465.DOI:10.13229/j.cnki.jdxbgxb20171283. [详细]
  13. Z. Lin, P. Feng, J. Zhang, D. Yu and Z. Wu, "A calculation method for the stability lobes of 3-DOF Boring," 2018 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) [详细]
  14. Zha, H., Feng, P., Zhang, J. et al. Material removal mechanism in rotary ultrasonic machining of high-volume fraction SiCp/Al composites. Int J Adv Manuf Technol 97, 2099–2109 (2018). [详细]
  15. Lin, Z., Zhang, J., Feng, P. et al. Modeling and optimization of thermal characteristics for roll grinders. Int J Adv Manuf Technol 97, 993–1004 (2018) [详细]
  16. Liao, J., Yu, D., Zhang, J. et al. An efficient experimental approach to identify tool point FRF by improved receptance coupling technique. Int J Adv Manuf Technol 94, 1451–1460 (2018). [详细]
  17. Jianjian Wang, Pingfa Feng, Jianfu Zhang, Ping Guo, Experimental study on vibration stability in rotary ultrasonic machining of ceramic matrix composites: Cutting force variation at hole entrance, Ceramics International, Volume 44, Issue 12, 2018, Pages 14386-14392 [详细]
  18. Wang, J., Zhang, J., Feng, P., Guo, P., and Zhang, Q. (March 6, 2018). "Feasibility Study of Longitudinal–Torsional-Coupled Rotary Ultrasonic Machining of Brittle Material." ASME. J. Manuf. Sci. Eng. May 2018; 140(5): 051008. https://doi.org/10.1115/1.4038728 [详细]
  19. Jianjian Wang, Jianfu Zhang, Pingfa Feng, Ping Guo, Experimental and theoretical investigation on critical cutting force in rotary ultrasonic drilling of brittle materials and composites, International Journal of Mechanical Sciences, Volume 135, 2018, Pages 555-564 [详细]
  20. Wang J, Feng P, Zhang J*, Reducing edge chipping defect in rotary ultrasonic machining of optical glass by compound step-taper tool [J], Journal of Manufacturing Processes, 2018, 32: 213-221 [详细]
  21. Wang J, Zhang J, Feng P, et al. Damage formation and suppression in rotary ultrasonic machining of hard and brittle materials: a critical review[J]. Ceramics International. 2018, 44(2): 1227-1239. [详细]

专利

  1. Jianjian Wang, Pingfa Feng, Zhiwei Li, Jianfu Zhang, Dingwen Yu, Zhijun Wu, Zhongpeng Zheng. Vibration-chiseling machining method. America, PCT/CN2023/126872. [详细]
  2. 王健健,张建富,郑中鹏,冯平法,吴志军,郁鼎文,李志伟. 金属表面高深宽比柱状微纳织构的高效加工装置和方法:CN202310118836.0[P].2023-4-28.(公开) [详细]
  3. 王健健,冯平法,李志伟,张建富,郁鼎文,吴志军,郑中鹏. 制备金属微纤维的振动加工方法、装置、电子设备及介质:CN202310167268.3[P].2023-02-27.(公开) [详细]
  4. 王健健,冯平法,李志伟,张建富,郁鼎文,吴志军. 高深宽比表面微结构的倒退式振动切削加工方法及系统: CN202210070821.7[P].2022-06-10.(授权) [详细]
  5. 王健健,冯平法,李志伟,张建富,郁鼎文,吴志军,郑中鹏. 锯齿状多级表面微织构的仿形振动切削加工方法及装置: CN202210474233.X[P].2022-07-29.(公开) [详细]
  6. 王健健,冯平法,李志伟,张建富,郁鼎文,吴志军,郑中鹏. 金属表面三维结构的加工方法、装置、设备及存储介质: CN202210466635.5[P]. 2022-08-05.(授权) [详细]
  7. 王健健,张建富,刘嘉辉,冯平法,郁鼎文,吴志军,张翔宇. 基于轨迹匹配的振动锤击表面强化装置及其控制方法[P]. 北京市：CN115305327A,2022-11-08. [详细]
  8. 张建富,冯平法,赵甘霖,吴志军,郁鼎文. 一种增强现实三维注册方法及装置[P]. 北京市：CN112053447B,2022-10-25. [详细]
  9. 张建富,王子标,刘嘉辉,冯峰,冯平法,王健健,张翔宇. 纵弯匹配振动的内孔强化装置[P]. 北京市：CN115232937A,2022-10-25. [详细]
  10. 王健健,张建富,兰天,冯平法,郁鼎文,吴志军,张翔宇. 超声加工系统承载能力的测量装置及评价方法[P]. 北京市：CN115077691A,2022-09-20. [详细]
  11. 张建富,王子标,刘嘉辉,王健健,冯平法,吴志军,郁鼎文. 环形零件变形校正方法和系统[P]. 北京市：CN114818172A,2022-07-29. [详细]
  12. 王健健,冯平法,郑中鹏,张建富,吴志军,郁鼎文,李志伟. 非对称仿生鱼鳞型微结构的加工方法及装置[P]. 北京市：CN114770217A,2022-07-22. [详细]
  13. 王健健,张建富,杨金川,冯平法,吴志军,郁鼎文. 双激励超声椭圆振动切削装置及其优化设计方法[P]. 北京市：CN113941872A,2022-01-18. [详细]
  14. 冯平法,张建富,罗文涛,郁鼎文,吴志军. 智能拧紧设备[P]. 北京市：CN111002019B,2021-12-31. [详细]
  15. 张建富,王子标,沈岳,王健健,冯平法,吴志军,郁鼎文. 用于孔强化的挤压芯棒及其设计方法、孔强化系统[P]. 北京市：CN113722825A,2021-11-30. [详细]
  16. 沈岳,郭忠,王子标,刘嘉辉,李月琳. 一种冷挤压强化连接孔的渐进式挤压芯棒[P]. 山东省：CN214919301U,2021-11-30. [详细]
  17. 冯平法,张建富,兰天,王健健,郁鼎文,吴志军. 一种超磁致伸缩换能器及其温控方法[P]. 北京市：CN113102209B,2021-11-23. [详细]
  18. 张建富,冯平法,周辉林,吴志军,郁鼎文. 超磁致伸缩超声换能器谐振频率确定装置及方法[P]. 北京市：CN111504444B,2021-11-05. [详细]
  19. 张建富,冯平法,罗文涛,崔若愚,吴志军,郁鼎文. 仿生力驱动装置及其控制方法[P]. 北京市：CN110385706B,2021-10-19. [详细]
  20. 张建富,冯平法,黄博浩,郁鼎文,吴志军. 无人机状态监管方法、装置、系统及可读存储介质[P]. 北京市：CN111459187B,2021-09-07. [详细]
  21. 冯平法,查慧婷,刘世杰,张建富,冯峰,杨金川. 超磁致伸缩超声换能器、单激励超磁致伸缩超声椭圆振动刀柄和超声加工系统[P]. 北京市：CN112170151B,2021-09-07. [详细]
  22. 张建富,冯平法,崔若愚,马恪,郁鼎文,吴志军. 超声加工装置及超声加工系统[P]. 北京市：CN112317288B,2021-09-07. [详细]
  23. 张建富,冯平法,肖轩,余畅,王健健,吴志军,郁鼎文. 基于视觉的转轴位姿检测方法和装置[P]. 北京市：CN113205561A,2021-08-03. [详细]
  24. 张建富,高鹏,杜天宇,冯平法,吴志军,郁鼎文. 分体式TBM刀盘结合部特性缩尺测量方法及系统[P]. 北京市：CN110427656B,2021-07-27. [详细]
  25. 张建富,冯平法,阿曼沙,马恪,吴志军,郁鼎文. 用于蜂窝复合材料的杆组式装夹系统[P]. 北京市：CN110524276B,2021-04-27. [详细]
  26. 张建富,冯平法,黄博浩,郁鼎文,吴志军. 基于无人机集群的应急临时网络通信方法及装置[P]. 北京市：CN111722644A,2020-09-29. [详细]
  27. 冯平法,张建富,罗文涛,郁鼎文,吴志军. 一种用于螺栓联接的拧紧力矩自适应补偿方法[P]. 北京市：CN109583043B,2020-09-22. [详细]
  28. 张建富,冯平法,周辉林,郁鼎文,吴志军,查慧婷. 一种超磁致伸缩材料换能器预紧方法与装置[P]. 北京市：CN110841893B,2020-08-14. [详细]
  29. 张建富,林志杭,陈军闯,陈艳娟,冯平法,郁鼎文,吴志军. 轧辊磨床的工件定位装置及其温度检测方法[P]. 北京市：CN106826433B,2020-06-19. [详细]
  30. 张建富,冯平法,罗文涛,吴志军,郁鼎文. 螺栓位姿检测仪及螺栓位姿检测拧紧装置[P]. 北京市：CN109909732B,2020-06-12. [详细]
  31. 张建富,吴志军,马恪,罗文涛,冯平法,郁鼎文. 一种面向叠层材料的超声辅助钻铆装置[P]. 北京市：CN109926826B,2020-06-12. [详细]
  32. 张建富,冯平法,周辉林,郁鼎文,吴志军. 稳态平衡冷却系统及其方法[P]. 北京市：CN108662834B,2020-05-19. [详细]
  33. 张建富,冯平法,王骁,郁鼎文,吴志军. 无人机路径规划方法、系统、计算机设备及可读存储介质[P]. 北京市：CN111142557A,2020-05-12. [详细]
  34. 张建富,冯平法,周辉林,郁鼎文,吴志军. 超磁致伸缩换能器谐振频率跟踪系统及方法[P]. 北京市：CN109061294B,2020-01-24. [详细]
  35. 张建富,冯平法,周辉林,郁鼎文,吴志军. 热装式超磁致伸缩超声刀柄[P]. 北京市：CN109109173B,2019-11-22. [详细]
  36. 张建富,冯平法,罗文涛,郁鼎文,吴志军. 柔性螺栓垫圈上料系统[P]. 北京市：CN109573531B,2019-11-22. [详细]
  37. 张建富,郁鼎文,周辉林,冯平法,吴志军. 超声系统负载与谐振频率关系的测试装置[P]. 北京市：CN108287196B,2019-11-22. [详细]
  38. 张建富,冯平法,罗文涛,郁鼎文,吴志军. 应激传感系统及应用应激传感系统的机器人[P]. 北京市：CN109269690B,2019-10-18. [详细]
  39. 张建富,郁鼎文,周辉林,冯平法,吴志军. 超磁致伸缩超声换能器、超声刀柄及旋转超声加工系统[P]. 北京市：CN108704830B,2019-07-09. [详细]
  40. 张建富,冯平法,查慧婷,郁鼎文,吴志军. 一种超声振动辅助螺旋铣磨螺纹方法[P]. 北京：CN107442873A,2017-12-08. [详细]